CONSTRUCTION OF CHARCOAL STOVE
Abstract
ABSTRACT
This project work is on the construction of charcoal stove for domestic utilization. The construction process of the charcoal stove involves the selection of materials, the measuring out, marking out, cutting, filing, welding and painting as the finishing touches. The constructed charcoal stove consists of the following dimensions: lengths of the charcoal chamber – 300mm, width of the charcoal chamber – 290mm. Both length and width of ash chamber-120mm. Height of the charcoal stove 270mm, both width and length fan chamber-100mm, total length of the charcoal stove-600mm. From the water boiling test (WBT) carried out, the result obtained shows that, the improved charcoal stove performance is much better than traditional metal stove with higher efficiency of combustion. Therefore improved charcoal stove is recommended for domestic uses due to its suitability in application than the traditional metal stove.
Full-Text Access Notice
In accordance with the NERD Policy on promoting peer-reviewed publication, public access to the full text of a project, thesis or dissertation is restricted for three years, allowing the author and supervisors sufficient time to pursue peer-reviewed publication.
During this period, researchers with legitimate academic or research purposes may request authorisation directly from the author to enable NERD to release the indexed full texts of the work using the form below.