DESIGN AND FABRICATION OF RICE THRESHER
Abstract
The aim of this project work is to construction of a rice threshing machine. The rice threshing machine is made up of the following components: a feeder, chute, gasoline engine, rice chamber, belt, bearing, shaft, pulley and frame. All these components are made up of the machine. Welding operation was carried out to weld some of these components together. Electric arc welding operation was used to frame up the machine and welding of the components. Then after, filler was applied to obtain a good and smooth surface finish and the paint was applied to achieved the aim. The rice threshing machine and the experimental result showed that machine is 85% efficiency.
Full-Text Access Notice
In accordance with the NERD Policy on promoting peer-reviewed publication, public access to the full text of a project, thesis or dissertation is restricted for three years, allowing the author and supervisors sufficient time to pursue peer-reviewed publication.
During this period, researchers with legitimate academic or research purposes may request authorisation directly from the author to enable NERD to release the indexed full texts of the work using the form below.