DESIGN AND CONSTRUCTION OF AUTOMATIC WATER LEVEL CONTROLLER
Abstract
ABSTRACT
An automatic water level controller is a device used to regulate the water level in a tank or reservoir. It is designed to maintain a desired water level by automatically adding or removing water as needed. The controller typically consists of a sensor or switch that detects the water level and a control system that operates a valve or pump to adjust the water level. The design and construction of an automatic water level controller involve several components and steps. Determine the requirements: The first step is to determine the requirements of the system, such as the desired water level range, the maximum and minimum water levels, the flow rate of the valve or pump, and the power supply. Select the components: Based on the requirements, select the appropriate components for the system, such as a sensor or switch, a control system, a valve or pump, and a power supply. Install the sensor or switch: Install the sensor or switch at a suitable location in the tank or reservoir where it can accurately detect the water level. The sensor or switch should be connected to the control system. Connect the control system: Connect the control system to the sensor or switch and to the valve or pump. The control system should be programmed to activate the valve or pump when the water level reaches the desired range. Install the valve or pump: Install the valve or pump in the tank or reservoir. The valve or pump should be connected to the control system and should be able to adjust the water level as needed. Test the system: Test the system to ensure that it is working correctly. Adjust the settings of the control system as needed to achieve the desired water level. Overall, the design and construction of an automatic water level controller involve careful consideration of the requirements, selection of appropriate components, and proper installation and testing of the system. By following these steps, a reliable and accurate water levelcontroller can be created to maintain the desired water level in a tank or reservoir.
Full-Text Access Notice
In accordance with the NERD Policy on promoting peer-reviewed publication, public access to the full text of a project, thesis or dissertation is restricted for three years, allowing the author and supervisors sufficient time to pursue peer-reviewed publication.
During this period, researchers with legitimate academic or research purposes may request authorisation directly from the author to enable NERD to release the indexed full texts of the work using the form below.