OPTIMIZATION OF BIODIESEL PRODUCTION FROM WASTE VEGETABLE OIL USING HOMOGENOUS CATALYST
Abstract
This research focuses on the optimization of biodiesel production from waste vegetable oil (WVO) utilizing sodium hydroxide as a homogeneous catalyst. As the world struggles with environmental challenges and the scarcity of fossil fuels, renewable energy sources such as biodiesel offer sustainable alternatives. The study aimed to optimize critical parameters such as methanol-to-oil ratio, reaction time, reaction temperature, and catalyst loading to achieve high yields and quality of biodiesel. Response Surface Methodology (RSM) was employed for the experimental design. The produced biodiesel was characterized in terms of key properties like viscosity, acid value, and flash point, ensuring compliance with international standards. Results from the optimization process revealed a methanol-to-oil ratio of 6.52:1, reaction temperature of 60.79°C, reaction time of 54.78 minutes and catalyst loading of 0.85 wt% with the optimum biodiesel yield as 91.42%. The quadratic model was able to adequately predict the biodiesel yield with a coefficient of determination (R2) of 0.97. The study demonstrates the potential of WVO as a cost-effective feedstock for biodiesel production and contributes to reducing environmental pollution while supporting sustainable energy development
Full-Text Access Notice
In accordance with the NERD Policy on promoting peer-reviewed publication, public access to the full text of a project, thesis or dissertation is restricted for three years, allowing the author and supervisors sufficient time to pursue peer-reviewed publication.
During this period, researchers with legitimate academic or research purposes may request authorisation directly from the author to enable NERD to release the indexed full texts of the work using the form below.